| Author |
Message |
   
marion edwards
Member Username: Maz
Post Number: 2 Registered: 01-2013
| | Posted on Sunday, 6 January, 2013 - 11:59 am: | |
Thanks for the help guys, I will try putting the bit a hole higher and if that doesnt work will get a ported one. We are in Bournemouth so if anyone can reccommend someone knowledgeable local to us that would be great. I do intend to get help when we get further down the line training wise but at the moment we are just starting and hes been so easy so far Ive come to the conclusion that he must have been driven before in his life. |
   
Tabe Annema
Member Username: Tabe
Post Number: 4 Registered: 01-2012
| | Posted on Sunday, 6 January, 2013 - 9:40 am: | |
Hi, It might be helpfull to get a bit with an arched mouthpiece. This is where the mouthpiece arches up rather than a mullen mouthpiece which arches forward. |
   
Patti Atkinson
Member Username: Pattia
Post Number: 69 Registered: 03-2007
| | Posted on Saturday, 5 January, 2013 - 9:07 pm: | |
Straight bar and cobs often dont go together - if he has fleshy tongue. My old cob put tongue over with straight bar but a low port or mullen was fine. But a riding bit is ok to use. Would suggest that you get experienced help though - there may be someone local to you that could help - where are you based? |
   
Lorna Ingam
Member Username: Stigman
Post Number: 7 Registered: 04-2010
| | Posted on Saturday, 5 January, 2013 - 7:16 pm: | |
hi driving bits generaly go a hole higher than riding bits if this helps !!i have also driven mine in a snaffle and a driving bit but driving bit recomended in early stages for safety ! maybe try hole higher and a flash to make it harder for him to get tongue over ?? lorna |
   
marion edwards
Member Username: Maz
Post Number: 1 Registered: 01-2013
| | Posted on Saturday, 5 January, 2013 - 7:08 pm: | |
Hi, am new here and to driving. Have just started breaking my cob to drive and hes been a star so far in all that weve done. He does however know how to get his tongue over the bit when we are long reining him. Its a sliding cheek liverpool with a straight bar and 3 slots. My questions are : do you have to use a driving bit or is a riding bit acceptable for driving? and any tips for stopping him getting his tongue over? Its a new thing he has taught himself recently, clever boy that he is Thanks for any help. |