Sprenger and British-made bits for sale Log Out | Topics | Search
Moderators | Edit Profile

Horse driving trials forum » Archive » For Sale/Wanted 2012-15 » Sprenger and British-made bits for sale « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Fiona Powell
Member
Username: Fionap

Post Number: 348
Registered: 03-2007
Posted on Sunday, 22 March, 2015 - 5:27 pm:   

All sold, thank you.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fiona Powell
Member
Username: Fionap

Post Number: 347
Registered: 03-2007
Posted on Thursday, 19 March, 2015 - 4:47 pm:   

Bits still for sale, good prices - many are hard-to-find pony sizes. All used and in excellent condition - find a bargain!
(Cherry roller and Wilson snaffle sold.)
Top of pagePrevious messageNext messageBottom of page Link to this message

Fiona Powell
Member
Username: Fionap

Post Number: 343
Registered: 03-2007
Posted on Saturday, 21 February, 2015 - 2:14 pm:   

These are all good quality stainless steel British-made bits, several from Ride and Drive, some made to special order and almost all have been used, all are in very good used condition. Most are Liverpool two-slot, made to correct pony proportions. Others are as described.

Cherry roller straight bar 4.5"

Double-jointed snaffle 5.2" (just under 5 1/4" at maximum "stretch")

KK Ultra, double-jointed snaffle with Aurigan mouthpiece (a beautifully made bit, the Aurigan is discoloured now (as it has not been used for a while) - it is a specially designed metal to encourage salivation) 13cms/just over 5"

"What I call a" French link - slightly shaped "peanut" in a double-jointed snaffle, 4.5"

Sam Marsh, 1 and 1/8" wide rotating mouthpiece - a fraction under 5"

Mullen mouth 4.5"

Low port - between 4.5 and 4.75"

Square low port with rotating mouthpiece - 4.5"

Wilson snaffle with rubber mouthpiece - used once - 5" to outside rings

Nickel butterfly snaffle with curb chain - 4.5" (new, Cottage Craft, never used)

The stainless bits are £40 each, including economy postage to UK mainland addresses, with the cherry roller £45, the Sam Marsh £70, the KK Ultra £120 (used twice, was £250 new, KK curb chain included).
Curb chains £5 each.
Subtract £5 for each bit if you have more than one.

Please email me if you'd like high resolution photos sent?
fionap@innate.co.uk or call 01473 735732

Thank you for your interest.

pic1 pic2 pic3

pic4 pic5 pic6

pic7 pic8 pic9

pic10

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration